It’s no secret that an digital gas injection conversion requires a collection of gas system upgrades—however a whole lot of of us overlook the necessity for a return line to ship unused gas again to the tank on a separate circuit. (This text explains the entire gas return factor in additional element.)
Meaning you’ll in all probability want so as to add a return becoming to your gas tank to permit the returned gas to dump again in—not a giant deal in case you’re useful with a welder, however a really massive deal in case you don’t wish to weld AND don’t have entry to the bottom of the gas tank.
That’s why the EFI consultants at FAST supply an ingenious resolution with their EZ-EFI Return Line Becoming.
If you happen to’ve ever used a rivet device earlier than, you then’re in all probability acquainted with how this useful becoming works:
- Drill a 1/2 inch gap into the tank for the becoming, then gently tap-in the bung meeting.
- Utilizing a big wrench to carry the bung’s outer collar, you crank-down the bolt.
- Because it tightens, the bolt pulls up the crush sleeve on the again of the bung (contained in the tank).
- The aluminum sleeve will deform towards the bottom of the tank, creating a robust seal to carry the bung.
- Take away the bolt and insert the -6 AN becoming as a substitute—voilà, you’ve bought a port firmly in your tank.
FAST inform us this becoming will work with any tank materials as much as 1/4 inch thick and, higher nonetheless, it says you need to use this becoming for a gas return, oil return, energy steering return, or an bizarre vent port.
Get all of the specs you want by clicking on the half quantity under:
- FST-307031 – FAST EZ-EFI -6 AN Return Line Becoming
